Semi-finished Oil Based Injectable Trenbolone Enanthate 200mg/ml for Muscle Gain on Sale
Trenbolone Enanthate 200mg/ml Characteristics
Main active substances
Trenboxyl Enanthate, Tren E,
Semi-finished Oil Based Injectable Trenbolone Enanthate 200mg/ml for Muscle Gain on Sale
Content: Trenbolone Enanthate raw powder.
Solvents: benzyl alcohol & benzyl benzoate
Carrier: USP grape seed oil. (or other carrier oil as required.)
Concentrations of semi finished trenbolone enanthate oil available:
@100 mg/ml @150 mg/ml @200 mg/ml
Oil Based Trenbolone Enanthate - 1000ml @200mg/ml Common Recipe:
200 grams of trenbolone enanthate powder;
20 ml of benzyl alchocol;
200 ml of benzyl benzonate;
598.2 ml of grape seed oil (or other carrier oil.)
If you prefer, you also could replace grape seed oil into ethyl oleate or MCT.
Injectable Trenbolone Enanthate 200 Introduction:
Trenbolone 200 is an injectable steroid made by HKYCYC, its active substance is Trenbolone Enanthate.
Trenbolone Enanthate was the steroid produced by underground labs to take the place of Parabolan, and its obscure ester. Tren enanthate basically is the longest acting version of tren we have available on the market right now, and it actually offers a couple of advantages over the traditional Tren A that’s been available for the last couple of years as either an UG Product.
Trenbolone 200 is a19-nor steroid, very similar to Nandrolone. The primary difference between Trenbolone is that there is a double carbon bond present at the 9 and 11 position on the steran nucleus. Trenbolone can not aromatize to estrogen nor be 5a-reduced.
It bonds very tightly to the Androgen Receptor, and for this reason it is thought that much of its fat-burning and muscle building abilities are receptor mediated.
Trenbolone 200 use produces an impressive amount of new muscle fiber, with minimal water retention. This may be done partly through an increase in IGF-1 within muscle tissue, and increased sensitivity of muscle satellite to IGF-1 and other growth factors and an increase in the amount of DNA per muscle cell.
It has a very strong binding affinity to the androgen receptor (A.R), binding much more strongly than testosterone as well as Nandrolone.
Trenbolone 200 increases both protein synthesis as well as nitrogen retention in muscle tissue. Trenbolone can also bind with the (anti-anabolic) glucocorticoid receptor, thus aiding the muscle building process.
Injectable Trenbolone Enanthate 200 Usage:
Since Trenbolone Enanthate is the acetate form of trenbolone, its effect lasts only a short time and frequent administration is necessary. Most athletes inject I ml (30 mg) every second day. Higher dosages such as, for example, 30 mg per day or 60 mg every two days, however, were not unusual since an enormous strength gain and also a strong but still high-quality muscle gain was obtained. Trenbolone 200 does not aromatize since its substance is not changed into estrogens. In combination with Winstrol it has a dramatic effect on the body's appearance. To achieve a gigantic strength gain bodybuilders used to combine 30 mg Trenbolone 200 every 1-2 days and 50 mg Winstrol Depot every 1-2 days during preparation for a compe-tition and the buildup phase. No other combination gives the athlete such an incredible hardness and such a defined muscle gain. The possible physical change obtainable in only a few weeks is enormous enough to shock some non-involved observers. Believe us, competing bodybuilders love this combination especially. Trenbolone 200 was also part of probably the most effective stack for mass buildup. Together with Dianabol or Anadrol 50, and testosterone, builds up strength and mass in record time. So much about the positive aspects of Trenbolone 200 which, unfortunately, are often spoiled by its considerable negative side effects.
In bodybuilding and powerlifting Trenbolone Enanthate is exclusively used to build up strength and mass. The term "mass buildup" can be taken quite literally by the reader since the gain is not always the way expected by its user. In most athletes Trenbolone 200 leads to quite a rapid and pronounced increase in body weight, which usually goes hand in hand with a strong water retention. This results in watery and puffy muscles.
The pronounced androgenic component of Trenbolone 200 goes hand in hand with a high anabolic effect which manifests itself in a high strength gain characterized by a liquid accumulation in the joints, an increased pump effect, increased appetite, and a possible improved regeneration of the athlete. Since Trenbolone Enanthate easily aromatizes, the intake of anti-estrogens is suggested. This can also help reduce some of the water retention. Although Trenbolone 200 has a duration effect of a good 2-3 weeks it is usually injected at least once a week.
Trenbolone 200 is often combined with Dianabol, Anadrol 50, and Deca Durabolin that accelerates the gain in strength, mass, and water retention. The gains achieved with Trenbolone 200, as is the case with Testosterone, for the most part, usually subside very quickly after use of the compound is discontinued.
Injectable Trenbolone Enanthate 200 Effects:
Trenbolone enanthate is a steroid used by veterinarians on livestock to increase muscle growth and appetite. Trenbolone compounds have a binding affinity for the androgen receptor five times as high as that of testosterone. Trenbolone Enanthate truly shines is in its ability to greatly preserve lean muscle tissue; perhaps better than any anabolic steroid on earth.
Injectable Trenbolone Enanthate 200 Side Effects:
Out of all the injectable steroids available, Trenbolone 200 is the one that should be used with extreme caution and only after plenty of research into its side effects and common cycles have been carried out. Trenbolone side effects can be very bad to many users, so much so that they will not use it despite its very positive effects on the body and strength. Firstly, as Trenbolone 200 is so androgenic, all side effects that are seen with strong androgens can be expected with Trenbolone 200. If one is prone to male pattern baldness (MPB) than trenbolone will likely speed this up. Some users find acne on trenbolone worse than when on any other steroid. Certainly Trenbolone 200 is not recommended for female users due to its strong androgenic properties and the common side effects that manifest themselves in females who use strong androgens.
The Side Effects of Trenbolone 200 are similar to those of other testosterone compounds. Next to the high water retention other negative effects that are noticed are a sometimes strong acne and a distinctly increased aggressiveness in some users. An aggressive behavior can mostly be explained by the fact that athletes simply use too high a dosage of Trenbolone 200 and too low a dosage of the other testosterones. The very severe acne, however, is only caused by Trenbolone 200. Often no purulent pustules but many small pimples appear so that the athlete looks as if he has an allergy. This is not intended to discourage anyone but it is a fact that many athletes after a brief time develop an acne on their lower arm, upper arm, shoulder, chest, back, and also in their face which, during an earlier intake of Sustanon or Testosterone Enanthate, did not manifest itself.
Step By Step Guide For Making Tren Enan 200 Oil Conversions.
The recipe we use for 1000 ml of trenbolone enanthate @ 200 mg/ml is up there.
We need to prepare: trenbolone enanthate powders 200 grams, 20 ml of benzyl alchocol, 200 ml of benzyl benzonate, 598.2 ml of grape seed oil (or other carrier oil.), a beaker with 1000 ml volume, a thermometer, a set of filter device (with sterile collector) and 2 syringes for BA and BB.
First, weigh out 100 grams of tren enan powder. Put 200 grams of tren enan raw powders into the beaker, add 20 ml of BA and 200 ml of BB;
Second, the melting point of tren enan is 69~71°C, we can use water bath to melt tren enan powder. Put the beaker in hot water bath which the temperature of water is about 95 to 100 °C and about 4 inches depth (Please pre-heat the water in advance.). After about 5 to 8 minutes heating in water bath, then the tren enan powder will be melted. By heating in water bath, the conversion won’t get dark even we heat it for a little longer time.
Third, after the powders in the beaker are melted completely, then we add GSO into the beaker and keep brewing. Use a magnetic stirrer if you have or use a glass rod to replace the stirrer. If you are using a magnetic stirrer, please watch out the temperature. Please set up at about 95 to 100 °C. Brewing for another 15 minutes and the brewing is done and it will be ready for filtering.
Before we inject the oil, we have to make sure it is safe and sterile for use, so sterile filtration have to be done.
Effective dose: 300-600 mg per week
Use for: 8 - 12 weeks
What Forms of Trenbolone Enanthate is HKYCGC Offering?
So far, we are offering Trenbolone Enanthate powder , Trenbolone Enanthate semi finished oil and Tri Tren 180 semi-finished oil , Anomass 400 semi finished steroid oil , Tren Test Depot 450 semi finished oil and TMT Blend 375 semi finished oil and TM Blend 500 semi finished oil , Megabol 300 semi finished oil ,Tren 251 semi finished oil ,TMT 425 semi finished oil , Trenbolone Multiplex 225 semi finished oil and Ultrablend 425 semi finished oil .
The best discrete or stealth packing method will be applied to make it delivered successfully.
On the other hand, if you get enough time, room and machine and other stuff for producing, you can also get trenbolone enanthate raw powders and other ingredients and produce by your own, we will offer full guide after you get the powders from us.
What is the minimum order quantity of your products?
Minimum order quantity of our steroids in powder is 10g.
Minimum order quantity of our semi-finished steroid liquid is 100ml.